Please use this identifier to cite or link to this item: https://elibrary.khec.edu.np:8080/handle/123456789/130
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGyawali, Tek Raj Prof. Dr.-
dc.date.accessioned2022-04-27T10:53:07Z-
dc.date.available2022-04-27T10:53:07Z-
dc.date.issued2014-05-
dc.identifier.urihttps://doi.org/10.3126/jsce.v2i0.22481-
dc.description.abstractWhen mixing Steel Fiber Reinforced Concrete (SFRC) in conventional mixers, there is limitation of fiber percentage (maximum up to 2.5%). And, when mixing in newly developed Energy Saving Gravity (ESG) continuous mixer with conventional mixing method, good quality of SFRC could not be obtained due to blockage problem even for low percentage of fibers when mixing continuously. In order to overcome both of above mentioned problem, new mixing method called “Pre-mix Method” is developed. This paper outlines the mechanism of new mixing technology and application of pre-mix method for mixing SFRC. It is verified that the use of this method has prevailed to make possible of SFRC with increase of fiber percentage up to 4% in new continuous mixer.en_US
dc.subjectESG continuous mixer, SFRC, New mixing mechanism, Inter-particle collision and Impact, Splitting and Re-combination, Pre-mix methoden_US
dc.titleDEVELOPMENT OF “PRE-MIX METHOD” FOR MIXING STEEL FIBER REINFORCED CONCRETE WITH NEW MIXING TECHNOLOGYen_US
Appears in Collections:Journal of Science and Engineering Vol.2

Files in This Item:
File Description SizeFormat 
2_T_R_Gyawali.pdf2.35 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.